Conditioning Chamber - Humidity Chamber

About Us

Hexa plast is a world class manufacturer and exporter of various type of plastic process laboratories testing machineries. We bring the innovation with perfection. We offer best in class machinery solution that includes polymers testing machine, Ancillary machineries, Different types of Plastic testing equipment, Plastic impact testing machine, Rubber testing machine, Woven sack & Raffia quality checking machines, as per industrial applications. We create top notch machineries that increase the productivity and decreases the production cost.

(Inspection and test of CPVC & Column Pipes, Monolayer / Multilayer Films checking, MDPE / HDPE / LDPE / LLDPE / UHMHDPE / ABS / PVC / PLB / Hose Suction Pipe, Textile testing machine for Fabric–Yarn, Garden pipes, Petrol pipe, section hose, Brided pipe / Sprinkler / PP-R Pipes, Lateral Pipes, PVC Sheets, U PVC for SWR, Water and chemicals storage Tanks, Electrical Conduits & Cables, Straps, Pet Bottles, kisan pipe, plastic material inspection, Recycle-Recycled-flexural vibration-plastic granule.

Our Product

Hot Air Oven

Usage/Purpose/Application of Hot air oven :

Hot air oven is used for multiple test application for plastics like shrinkage, reversion & moisture content.

This test method is applicable to distinguish between properly and improperly molded plastics. It can be used to determine whether cold slugs or shrinkage areas are present.

Size of inner S.S. chamber : 18 inch X 18 inch X 18 inches.

Temperature controller : Digital PID controller with Range up to 200 °C accuracy of ± 1.0 °C

Heating load : 2.5 kW

Air circulation : Radial fan

Tray : 1 numbers

Paint : Powder coating

Power : 230V AC , 50 Hz

Humidity Chamber

Usage/Purpose/Application of Humidity chamber:

Humidity chamber is used to determine the effect of specified environmental condition.

Humidity Chamber can use test specimens for further physical or chemical tests and also as environmental conditions for conducting testing of specimens.

Specification:

Inner chamber: size (As per Requirement)
Material: SS 304 (Inside)
Outer Chamber: Powder Quoted
Material: MS
Insulation: Puff Insulation.

Parameters:

Microprocessor based DRY/WET RH Indication and control
Temperature
Range : 10 °C to 60 °C (Degree Celsius)
Controlling : P.I.D Controlling action through SSR
Accuracy : 0.1 °C
Uniformity : ± 0.5°C

Humidity:

Range : 40% to 95% RH (Relative Humidity)
Controlling : Water Spray
Accuracy : ± 1%RH
Uniformity : ± 3%RH

Accessories:

Compressor : “kirloskar.” make for cooling.
Heaters : Cylindrical for heating purpose with Regulator control
Trey : 2 nos.
Door : Two Door Facility (One Is Glass Window and another one is Insulated Door)
Power : 1 phase, 230v AC, 50 HZ

UV Weathering

Usage/Purpose/Application of UV Weathering:

UV Weathering Tester simulates the effects of sunlight using special fluorescent UV lamps. It simulates dew and rain with condensing humidity and/or water spray.

The UV weathering tester reproduces the damage caused by sunlight, rain and dew. In a few days or weeks, the UV tester can reproduce the damage that occurs over months or years outdoors.

Specification:

Chamber inside dimension(D*W*H) : 450×1170×500mm

Outside dimensions(D*W*H) : 500×1380×1480mm

Temperature range : Ambient temperature +10°C～90°C

Temperature fluctuation : ±0.5°C

Temperature uniformity : ±2.0°C

Humidity range : ≥95%

Humidity fluctuation : ±2%

Humidity uniformity : ±2%

Blackboard temperature : 40°C～65°C

Box enclosure structure : SUS304 Stainless steel

Lamp center distance : 55±3mm

Distance of lamp center and specimen : 100mm

Lamp : 8 pcs Philips ultraviolet lamp

UV wavelength : 280nm—400nm

Water source : With water supply equipment

Controller : Digital Temperature Controller

Running mode : Fixed value

Setting mode : Key input

Sensor : Platinum resistance

Weight : 450kg

Control mode : PID auto setting

Time control : Digital Programmable controller

Specimen bracket : 6

Standard specimen : 75×150mm

Power: : AC220V±10% 50/60 Hz ≤3.5KW

Deep Freezer (0˚ Chamber)

Specification:

Size of the inner S.S chamber : 18” X 18” X 18”.
Temp range : Ambient to 0°C.
Temp controller : Digital PID Controller with
Accuracy : ± 0.1 °C.
Refrigeration : Through compressor.
Insulation : Puff Insulation.
Circulation : Induction Motor.
Paint : Powder Coating.
Power : 1 Phase, 230 V AC, 50Hz

Usage/Purpose/Application of Deep Freezer (0˚ Chamber):

Zero degree Chamber is for construction materials at non-ambient temperature

Any product and material show different properties at different environment. So for checking the properties of materials and product a standard temperature & humidity required for that particular product

-70˚c to 200˚c chamber (Humidity Chamber)

Usage/Purpose/Application of -70˚C TO 200˚C Chamber)(Humidity Chamber):

(-)70˚c Chamber is for construction materials at non-ambient temperature.
Any product and material show different properties at different
environment. So for checking the properties of materials and product a
standard temperature & humidity required for that particular product

Specification:

INNER CHAMBER: 20″ x 20″ x 28″ inch
MATERIAL: inner SS-304
OUTER CHAMBER: 30″ X 30″ X 56″ inch
MATERIAL: Outer SS-304
INSULATION: PUF (125MM)

Parameters:

MICROPROCESSOR BASED DRY/WET RH INDICATION & CONTROL
Temperature
RANGE : -70 TO 200 DEG C
(Dew point @ 10~20 Deg C : 5 Deg C)
(Dew point @ 20~30 Deg C : 7.5 Deg C)
(Dew point @ 30~50 Deg C : 10 Deg C)
CONTROLLING : pid plc

ACCURACY : ±

@ 200 TO 32 Deg C : ± 1 Deg C
@ 32 TO 5 Deg C : ± 2 Deg C
@ 5 TO -20 Deg C : ± 3 Deg C
@ -20 TO -40 Deg C : ± 4 Deg C
@ -40 TO -70 Deg C : ± 5 Deg C

UNIFORMITY :

@ 200 TO 32 Deg C : ± 2 Deg C
@ 32 TO 5 Deg C : ± 2.5 Deg C
@ 5 TO -20 Deg C : ± 3 Deg C
@ -20 TO -40 Deg C : ± 4 Deg C
@ -40 TO -70 Deg C : ± 5 Deg C

Humidity:

Temperature Range : Himidity Range
10 to 15 Deg C : 70 to 65 %
15 to 20 Deg C : 50 to 70 %
20 to 30 Deg C : 45 to 75 %
30 to 40 Deg C : 40 to 85 %
40 to 50 Deg C : 30 to 95 %
CONTROLLING : pid plc
ACCURACY : 3%
UNIFORMITY : 5%
Accessories:
COMPRESSOR : Two Stage Embraco 2 kw
HEATERS : 1.5 kw
TREY : 3 selves
DOOR : 1
POWER : 230v/ 1 phase

Climate chamber With Ambient to (-40°C.)

Specification:

Size of the inner S.S chamber: 1400 mm X 500 mm X 650 mm.
Temp range : Ambient to -40°C.
Temp controller : Digital PID Controller with
Accuracy : ± 0.1 °C.
Refrigeration : Through compressor.
Insulation : Puff Insulation.
Circulation : Induction Motor.
Paint : Powder Coating.
Power : 1 Phase, 230 V AC, 50Hz

Usage/Purpose/Application of Climate Chamber with Ambient to (-40°C.):

Climate chamber is for construction materials at nonambient temperature. Any product and material show different properties at different environment. So for checking the properties of materials and product a
standard temperature & humidity required for that particular product.

10 °C to 70 °C Chamber (Humidity Chamber)

Usage/Purpose/Application of 10 °C to 70 °C Chamber (Humidity Chamber):

10 °C to 70 °C chamber is used to determine the effect of specified environmental condition.

10 °C to 70 °C chamber can use test specimens for further physical or chemical tests and also as environmental conditions for conducting testing of specimens.

Specification:

Inner chamber: size 60cm X 120cm X 120cm ( LXWXH )
Volume of the chamber : 216 Liters.
Material: SS 304 (Inside)
Outer Chamber: Powder Quoted
Material: MS
Insulation: Puff Insulation.

Parameters:

Microprocessor based DRY/WET RH Indication and control

Temperature:

Range : 10 °C to 70 °C ( Adjustable)
Controlling : P.I.D Controlling action through SSR
Accuracy : 0.1 °C
Uniformity : ± 0.5°C

Humidity:

Range : 40 % RH to 95 % RH ( Adjustable)
Controlling : Water Spray
Accuracy : ± 3%RH
Uniformity : ± 3%RH

Accessories:

Compressor : “kirloskar.” make for cooling.
Heaters : Cylindrical for heating purpose with Regulator control
Trey : 03 nos. Shelves
Door : Two Door Facility (One Is Glass Window and another one is Insulated Door)
Power : 1 phase, 230v AC, 50 HZ

CONTACT US

Get in Touch

Address -
Plot No : L-4126/1, Phase IV, G.I.D.C. Vatva,
B/h. New Nirma , Vatava,
Nr. Nika tube cross Road,
Ahmedabad, Gujarat 382445

Phone -
+91 9825088726, +91 9825031377

Email -
[email protected]
[email protected]